4 Main Components:
UV Resistance Resin
Aggregate
Glow Stone
✔ Glow up to hours
✔ Permeable Pavement
✔ Suitable for Indoor & Outdoor
✔ Great with Aggregate & Pebble
Add the Aggregates and Glow Stone to the Mixer and mix evenly. The aggregate must be dry (<0.5% moisture) and free from dust.
Mix LessonBound A component prior to addition of B component, mix the A & B for 1-2 minutes to a smooth consistency. It is recommended to use one batch on a project. If more than one batch is to be used, care should be taken to use the same batch in one area in case of small batch to batch variation, this equally applies to the aggregate.
The mixed LessonBound resin should then be introduced into the mixer containing the previously mixed aggregate. A rotary mixer or low speed paddle mixer are suitable for mixing. Mix for 5 minutes until the mixture is uniformly coated.
Once mixed the product will be troweled onto either a Concrete base. (EXACTLY LIKE LAYING CONCRETE). Once laid the product will take approximately 4 hours to set and shall be kept away from dirt and rain waters. The pavement will be fully cured after 24 hours allowing for traffic.
